|
|
Products:
 |
|
|
|
£314.95 ex VAT
|
|
|
|
HNJ2286-SU-4CYL - Land Rover Series SU Carburettor Adaptor Kit - Throttle Cable Version - No Intake Elbow
HNJ Engineering brings you a conversion kit allowing the fitment of the following 1 3/4" SU carburettors to the Land Rover Series 2.25 petrol engine. Carburettor not included.
Carburettors compatible with this kit:
- Zenith Stromberg CD175 (Right Hand) - 1 3/4" (SU Part Number LZX 1739 - Lever Required. Some internal filling required as the CD175 spindle is marginally thicker than the HIF44)
- SU HIF 44 (Right Hand) - 1 3/4" (SU Part Number LZX 1739 Lever fitted as standard)
- SU HS6 - 1 3/4"
- SU HD6 - 1 3/4"
|
|
£184.95 ex VAT |
|
|
 |
HNJ2286-SU-4CYL - Land Rover Series SU Carburettor Adaptor Kit - Basic Version
HNJ Engineering brings you a conversion kit allowing the fitment of the following 1 3/4" SU carburettors to the Land Rover Series 2.25 petrol engine. Carburettor not included.
Carburettors compatible with this kit:
- Zenith Stromberg CD175 (Right Hand) - 1 3/4" (SU Part Number LZX 1739 - Lever Required. Some internal filling required as the CD175 spindle is marginally thicker than the HIF44)
- SU HIF 44 (Right Hand) - 1 3/4" (SU Part Number LZX 1739 Lever fitted as standard)
- SU HS6 - 1 3/4"
- SU HD6 - 1 3/4"
|
|
£139.95 ex VAT |
|
|
|
HNJ2286-010 - HIF44 SU Carburettor Air Intake Elbow - Adaptor
HNJ Engineering brings you a 90 degree air intake adaptor for use in conjunction with the SU HIF44 Carburettor. Fitment of this adaptor allows you to retain the use of the oil bath air filter and rubber hose when fitted in conjunction with our HNJ2286-SU-4CYL - Land Rover Series SU Carburettor Adaptor Kit.
Manufactured from cast Aluminium Alloy LM25.
HNJ2286-010 supersedes legacy part number: HNJ2286-004.
|
|
£134.95 ex VAT |
|
|
|
HNJ346849 - Land Rover Series 3 Bonnet Hinge Bush
HNJ Engineering brings you a re-manufactured equivalent of Prt No: 346849 – Land Rover Series 3 Bonnet Hinge Bush.
These bushes are manufactured in the UK from injection moulded Acetal. This improved design has 'wings' either end to prevent the bush sliding out from the bulkhead during service. Acetal is a high strength, low friction engineering plastic.
|
|
|
|
|
|
|
|
|
£19.95 ex VAT |
|
|
|
|
|
£8.25 ex VAT |
|
|
|
|
|
£11.95 ex VAT |
|
|
|
|
|
£11.95 ex VAT |
|
|
|
|
|
£21.50 ex VAT |
|
|
|
|
|
£8.25 ex VAT |
|
|
|
|
|
|
£29.95 ex VAT |
|
|
 |
HNJ733186 - Land Rover Series Lucas CW1 Wiper Motor Park
HNJ Engineering brings you a remanufactured equivalent of 733186 Land Rover Series CW1 Lucas Wiper Motor Park.
As fitted to the front of the Lucas Wiper Motor assembly on the Land Rover Series 1 and many other vehicles from this period.
These items are laser cut from 2mm thick Stainless Steel S316 and offer excellent corrosion resistance in comparison to the original steel items fitted by Lucas.
|
|
£8.95 ex VAT |
|
|
|
HNJRO1010 - Front Hub Castle Nut Spanner
HNJ Engineering brings you a re-manufactured equivalent of Prt No: RO1010 – Front Hub Castle Nut Spanner. Manufactured from EN24T Steel and Clear Zinc Passivated
Applicable models:
Land Rover Series 3 109" models fitted with 24 Spline Front Axles
Land Rover Series 3 88" Post 1980 fitted with 24 Spline Front Axles.
|
|
£47.50 ex VAT |
|
|
 |
|
|
£13.95 ex VAT |
|
|
 |
|
|
£31.95 ex VAT |
|
|
|
HNJFW2_003 - Land Rover Series Lucas FW2 Wiper Motor Escutcheon
HNJ Engineering brings you a remanufactured version of the Lucas FW2 Wiper Motor Escutcheon. Manufactured as a 3-part assembly from Aluminium 6082-T6. The crush tubes are an interference fit into the back of the main body.
Applicable models: Land Rover Series 2 & 2As.
|
|
£28.95 ex VAT |
|
|
|
|
|
£8.25 ex VAT |
|
|
|
|
|
£14.95 ex VAT |
|
|
|
|
|
£9.75 ex VAT |
|
|
|
HNJFW2_007 - Land Rover Series Lucas FW2 Windscreen Seal - Outer.
HNJ Engineering brings you a remanufactured version of the Lucas FW2 Wiper Motor Windscreen Seal - Outer
This seal fits between the Windscreen Frame & HNJFW2_003, against the outside profile whilst creating a positive seal against the Wiper Spindle (HNJ747118).
|
|
£2.95 ex VAT |
|
|
|
HNJFW2_005 - Land Rover Series Lucas FW2 Windscreen Seal - Inner.
HNJ Engineering brings you a remanufactured version of the Lucas FW2 Wiper Motor Windscreen Seal - Outer
This seal fits between the Windscreen Frame & HNJFW2_003, against the outside profile whilst creating a positive seal against the Wiper Spindle (HNJ747118).
|
|
£2.95 ex VAT |
|
|
|
HNJFW2_001 - Land Rover Series Lucas FW2 Wiper Motor Cork Seal
HNJ Engineering brings you a remanufactured cork seal as fitted between the two halves of the Lucas FW2 Wiper Motor.
Applicable models: Land Rover Series 1, 2 & 2As.
These gaskets are manufactured from Nitrile Cork that conforms to British Standard (BS) BS2F66 - Specification for Rubber Bonded Cork Sheets in accordance with ASTM F 104.
|
|
£4.55 ex VAT |
|
|
|
|
|
£12.95 ex VAT |
|
|
|
|
|
£13.95 ex VAT |
|
|
 |
|
|
£12.95 ex VAT |
|
|
|
|
|
£21.95 ex VAT |
|
|
|
|
|
£9.95 ex VAT |
|
|
|
HNJ536606 - Land Rover Series - MAP Freewheeling Hub - Front Oil Gasket
HNJ Engineering brings you a remanufactured equivalent of 536606/17 Land Rover Series MAP Freewheeling Hub - Front Oil Gasket.
As fitted between the body and cover casting of the MAP Freewheeling Hubs on Land Rover Series 1, 2, 2A & 3.
These gaskets are manufactured from high strength aramid fibers bonded with high-grade Nitrile (NBR) Rubber.
This material conforms to BS Specification 7531 Grade Y.
|
|
£2.85 ex VAT |
|
|
|
HNJ395241 - Land Rover Series Truck Cab Seat Belt Bracket - LH - KIT
HNJ Engineering brings you a remanufactured version of Land Rover part number: 395241 - Truck Cab Seat Belt Bracket - LH.
Manufactured as a laser cut, welded assembly from 2mm thick mild steel with a zinc plated finish.
Applicable models: Land Rover Series 2, 2A and 3.
This bracket is designed to be used in conjunction with HNJ395246 - Land Rover Series Truck Cab - Upper Bracket, which is included as part of this kit.
This kit includes the following:
1 xHNJ395241 - Land Rover Series Truck Cab Seat Belt Bracket - LH
1x HNJ395246 - Land Rover Series Truck Cab - Upper Bracket
|
|
£89.95 ex VAT |
|
|
|
HNJ395240 - Land Rover Series Truck Cab Seat Belt Bracket - RH - KIT
HNJ Engineering brings you a remanufactured version of Land Rover part number: 395240 - Truck Cab Seat Belt Bracket - RH.
Manufactured as a laser cut, welded assembly from 2mm thick mild steel with a zinc plated finish.
Applicable models: Land Rover Series 2, 2A and 3.
This bracket is designed to be used in conjunction with HNJ395246 - Land Rover Series Truck Cab - Upper Bracket, which is included as part of this kit.
This kit includes the following:
1 xHNJ395240 - Land Rover Series Truck Cab Seat Belt Bracket - RH
1x HNJ395246 - Land Rover Series Truck Cab - Upper Bracket
|
|
£89.95 ex VAT |
|
|
|
HNJ395246 - Land Rover Series Truck Cab Bracket - Upper
Manufactured as a laser cut, welded assembly from 2mm thick mild steel with a zinc plated finish.
Upper Bracket Fixings are included as below:
2x 5/16 UNF x 3/4" LG Stainless Steel Setscrews, 2x 5/16 Stainless Washers & 2x 5/16 Stainless Spring Washers.
2x 5/16 UNF x 1, 1/4" LG Stainless Steel Setscrews, 4x 5/16 Stainless Washers & 2x 5/16 Stainless Spring Washers & 2x 5/16 UNF Stainless Full Nuts.
|
|
£14.95 ex VAT |
|
|
|
HNJ274171 - Land Rover Series Petrol Inlet/Exhaust Manifold Gasket - 2.25 4 Cylinder
HNJ Engineering brings you a remanufactured version of the Land Rover Series Petrol Inlet/Exhaust Manifold Gasket for the 2.25 petrol 4 cylinder engine.
Manufactured from Novus TI. Novus TI is a graphite laminate product reinforced with a insertion of tanged 0.10mm thick 316 Stainless Steel. No adhesive is required to bond the graphite layers to the tanged insert resulting in a sturdy gasket material with excellent mechanical strength.
A significantly better fit than cheaper alternatives.
|
|
£8.95 ex VAT
|
|
|
|
HNJ272820 - Clutch Pedal Pedal Box Gasket
HNJ Engineering brings you a remanufactured equivalent of Land Rover Part No: 272820 Land Rover Series Clutch Pedal Pedal Box Gasket.
Gaskets are supplied with an adhesive backing for ease of fitment.
This part is identical to Land Rover 90/110 & Defender Part Number: MUC7505 & NRC8885.
|
|
£10.95 ex VAT |
|
|
|
HNJ90564832 - Brake Servo Pedal Box Gasket
HNJ Engineering brings you a remanufactured equivalent of Land Rover Part No: 90564832 Land Rover Series Brake Servo Pedal Box Gasket.
Gaskets are supplied with an adhesive backing for ease of fitment.
This part is identical to Land Rover 90/110 & Defender Part Number: MUC7506
|
|
£10.95 ex VAT |
|
|
|
HNJ231505 - Axle Drive Member Gasket
HNJ Engineering brings you a remanufactured equivalent of 231505 Axle Drive Member Gasket.
This item is fitted to
Series Land Rovers from 1948-84
This gasket offers a significantly better fit across the inside diameter than cheaper alternatives.
|
|
£1.30 ex VAT |
|
|
|
HNJ2286-007 - 2.5 Petrol Twin Choke Adaptor Plate
An adaptor plate which allows the fitment of our SU Carburettor Adaptor Kit (HNJ2286-SU-4CYL) to the 2.5 Petrol Twin Choke Manifold, part number ERC9069.
Fitment of this adaptor plate will allow the retention of the larger bore exhaust system that accompanies the 2.5 manifold, when fitted to a Series Land Rover.
Manufactured from aluminium rather than plastic, in order to transfer heat from the inlet manifold up into HNJ2286-SU-4CYL - Land Rover Series Carburettor Adaptor.
|
|
£69.95 ex VAT |
| |
|
|
HNJ2286-005 - Throttle Pedal Bracket
HNJ Engineering brings you a throttle pedal bracket designed for use with HNJ2286-SU-4CYL
This bracket is designed for use with HNJ2286-003 - Throttle Cable.
Note: This bracket can also be used when running the Weber 32/34 DMTL Carburettor Conversion on the Land Rover Series 2.25 petrol in conjunction with Land Rover Part Number: NTC2086 - Accelerator Cable 2.5 Petrol RHD.
Manufactured from 1.5mm thick Stainless Steel Grade 316
|
|
£8.95 ex VAT |
|
|
|
HNJ622045 - Land Rover Series Gearbox to Bellhousing Gasket
HNJ Engineering brings you a re-manufactured equivalent of Prt No: 622045. Land Rover Series gearbox to bellhousing.. Manufactured from high strength aramid fibers bonded with high-grade Nitrile (NBR) Rubber.
Used on Land Rover Series 1, 2, 2A & 3.
|
|
£5.75 ex VAT |
|
|
|
HNJ599698 - Land Rover Series Stub Axle Distance Piece
HNJ Engineering brings you a re-manufactured equivalent of Prt No: 599698. Land Rover Series Stub Axle Distance Piece.
These items are manufactured from Stainless Steel 316 in small batches using CNC (Computer Numerical Control) methods in the UK and offer an excellent surface finish on the outer diameter in comparison to cheaper alternatives.
Used on Land Rover Series 1, 2, 2A & 3.
|
|
£12.25 ex VAT |
|
|
|
HNJ622046 - Land Rover Series Gearbox to Transfer Box Gasket
HNJ Engineering brings you a re-manufactured equivalent of Prt No: 622046. Land Rover Series Gearbox to Transfer Box.. Manufactured from high strength aramid fibers bonded with high-grade Nitrile (NBR) Rubber.
Used on Land Rover Series 1, 2, 2A & 3.
|
|
£6.25 ex VAT |
|
|
|
HNJ270304 - Land Rover Series - Crankshaft Oil Seal Guides
A pair of these guides are required when fitting new '"T'" Seals to the crankcase on the Series Land Rover 3 & 5 main bearing engines.
These items are manufactured from Aluminium Alloy 6082-T6 in small batches using CNC (Computer Numerical Control) methods in the UK and are black anodised.
|
|
£39.95 ex VAT |
|
|
|
HNJ5000000 - Land Rover Series Gearbox Primary Pinion Nut Tool
This tool is used for tightening up the castle nut around the Primary Pinion shaft at the front of the gearbox where access is restricted due to the bell housing. These tools are manufactured from EN10305 - Cold Drawn Steel Tube Grade E235+C in small batches using CNC (Computer Numerical Control) methods in the UK.
|
|
£53.95 ex VAT |
|
|
|
HNJ213416 - Land Rover Series Input Shaft Lock Nut
HNJ Engineering brings you a re-manufactured equivalent of Prt No: 213416 – Input Shaft/Primary Pinion Lock Nut. Manufactured in the UK from EN24 Steel.
Applicable Models:
This nut is used on all Land Rover Series vehicles with the factory fitted gearbox from 1948-84
|
|
£21.95 ex VAT |
|
|
|
|
|
£59.95 ex VAT |
|
|
|
HNJ218386 Land Rover Series- Bush Handbrake Relay
HNJ Engineering brings you a re-manufactured equivalent of Prt No: 218386 – Bush - Handbrake Relay.
Manufactured in the UK from SAE660 Bronze.
This bush should be reamered after fitting to 0.7515 in. -0.001 in. (19,088mm - 0,0254mm)
Applicable Models:
All: 1948 - onwards
|
|
£13.95 ex VAT |
|
|
|
|
|
£4.75 ex VAT |
|
|
|
HNJ217477 - Land Rover Series Gearbox Mainshaft Lock Nut
Manufactured in the UK from AISI4340 (EN24T) to a higher quality than the genuine Land Rover part.
Applicable Models:
This nut is used on all Land Rover Series vehicles with the factory fitted gearbox from 1948-84 (Not V8 or 1 Ton models).
|
|
£11.95 ex VAT |
| |
|
|
HNJ7000000 - Land Rover Defender Steering Drop Arm Puller
Manufactured from 35mm thick S355 Structural Steel.
Applicable Models:
Land Rover Defender, 90, 110, 130 (1987 - 2006) 3 & 4 bolt steering boxes.
You are advised to check the dimensions across your Steering Drop Arm before ordering to check this puller is compatible with your vehicle.
|
|
£64.95 ex VAT |
|
|
|
|
Fairey Capstan Winch Drive Dog - Imperial
Re-manufactured equivalent of Fairey part number: 136-A3
3/4" clearance hole through centre of part.
Manufactured from EN24T Steel
Black powder coated
Spigot on rear face is present to allow location into the fan pulley keyway.
|
|
£44.50 ex VAT |
|
|
|
|
|
£69.95 ex VAT |
|
|
|
|
|
£79.95 ex VAT |
|
|
|
|
HNJ217354 Land Rover Series Front Halfshaft Bush.
Manufactured from SAE 660 Bearing Bronze this bush is used on the early Land Rover Series 2 type front stub axles and should be reamered, after fitting, to 1.250 in. +0.004 in. (31,75mm + 0,10mm).
|
|
£16.85 ex VAT |
|
|
|
